Фотогалерея

 

 

Здесь Вы можете посмотреть воочию на инструменты Osstem, включая наборы CAS и LAS, насадки для них, сверла и прочий инструмент, обращаем  Ваше внимание, что все фото можно развернуть по кнопке ...далее  расположенной в нижней части фото и получить полное описание продукта, его компонентов и разновидностей. Пока вся информация на английском языке, за что мы приносим свои извинения, в ближайшее время все будет переведено 



Drilling Sequence
Drilling Sequence
LAS drills
LAS drills
ㆍDome Drill - Macro and Micro cutting blades offer excellent cutting - Cutting Speed: 1,200 ~ 1,500 RPM - Drilling depth controlled with stopper system ㆍWide dome drill - Used to widen the window after using Dome drill - Excellent side cutting ability - Drilling depth controlled with stopper system - Cutting Speed: 1,200 ~ 1,500 RPM - Caution: Over drilling may cause membrane perforation ㆍCore drill - Creates window while creating bone lid to minimize direct contact - Drill design follows the successful design concept of CAS drills - Cutting Speed: 1,200 ~ 1,500 RPM - Drilling depth controlled with stopper system - Caution: Over drilling may cause membrane perforation. ㆍSide wall drill - Enlarges the window after using Dome drill - Cutting Speed: 1,500 RPM - Recommended to use cutting edge 1mm from the bottom. - Drilling depth controlled with CAS-KIT Stopper system CAS-KIT Stopper(mm) Side wall drill Side wall drill + CAS-KIT Stopper length (H:mm) Side wall drill + CAS-KIT Stopper 12 5 11 4 10 3 9 ... далее
Screw Removal Tools
Screw Removal Tools
Mini Regular/ Wide Short - ORVDRS Long ORVDML ORVDRL ㆍPacking Unit : each part ㆍTool for removing broken screws ㆍThis tool should be used together with the guide for each system ㆍWhen the marked part of the reverse drill is exposed above the guide connected to the fixture, make use of the screw-older to remove the broken Screws ㆍHand type ㆍMode: Counter clockwise ㆍLifecycle: Ten uses ㆍColor coding for easy discrimination of the specifications Mini: Yellow , Regular/ Wide : Green Mini Regular Wide TS Non-Hex ORVDRS OGGSN - Hex ORVDRL OGGS - SS Non-Octe OSGRN Octe OSGR US Hex OUGM OUGR OUGW ㆍPacking Unit : each part ㆍGuide used to prevent the reverse driver, the removal bur and the re-tap from centering or vibrating ㆍThe guide should be used after connecting to the abutment removal handle ㆍColor coding for easy discrimination of the specifications Mini: Yellow , Regular : Green , Wide : Green Mini Regular Wide Code OSHM OSHR OSHW ㆍPacking Unit : each part ㆍThis tool is used for removal of fractured screw; expose the fractured screw by 1-2 threads using a reverse driver, push it on the fractured screw for combination, and remove the fractured screw. ㆍThe guide should be used after connecting to the abutment removal handle ㆍColor coding for easy discrimination of the specifications Mini: Yellow , Regular : Green , Wide : Green Mini(M1.6) Regular(M2.0) Wide(M2.5) Code ORTM ORTR ORTW ㆍPacking Unit : each part ㆍTool used for forming new threads if a screw is not connected because the threads inside the fixture have been damaged ㆍColor coding for easy discrimination of the specifications Mini: Yellow , Regular : Green , Wide : Green Mini Regular Code OARTM OARTR ㆍPacking Unit : each part ㆍThis tool is used when part of a broken abutment or mount gets caught in the fixture ㆍRemove the fragment by shaking it with a forceps when connecting the fragment into the hole of the broken abutment, and then turn the connected part counter clock wise and fix the part ㆍThis tool is also used for removing a screw if it is not possible to remove the screw because the hex of the screw has slipped in the case of the Minit - It is possible to remove the screw by turning the screw counterclockwise and fixing the screw after connecting it to the slipped hex ㆍMini: Makes it possible to remove a screw whose hex has slipped Code OARH ㆍPacking Unit : each part ㆍThis tool should be used in conjunction with the guide Code OTSD07 ㆍPacking Unit : each part ㆍTool to be used after forming a slot with a bur of ø0.8 if it is not possible to exert force with the driver because of damage to the hex of the healing abutment, the cover screw and the abutment screw Code MSTH ㆍPacking Unit : each part ㆍThis tool is used for initial manual installation after connecting it to the connection section of the torque driver Code ORB ㆍPacking Unit : each part ㆍTool for removing broken screws ㆍThis tool is used for forming a hole on the broken surface of the screw if it is not possible to remove the screw with a reverse driver ㆍRotation direction: Clockwise ㆍRecommended rotation speed: 1500 ~5000 rpm ㆍThis tool should be used in conjunction with the guide ㆍIt is necessary to minimize the generation of heat by pumping and water injection, and to remove any chips left behind after removing the screw with a suction tool Code OSR ㆍPacking Unit : each part ㆍRotate the screw remover in the reverse direction in the hole of the broken surface of the screw formed by the removal bur to remove a broken screw Code OSR ㆍPacking Unit : each part ㆍThis tool is used for removing the transfer abutment of non-hex-type caught in the fixture as a result of contact with a Morse Taper ㆍThe terminal of the body is the Mini. The standard tool is inserted into the grooves in two stages in common usew ㆍRotate the screw remover in the reverse direction in the hole of the broken surface of the screw formed by the removal bur to remove a broken screw ㆍInsert the separate tool body into the hole inside the abutment after removing the abutment screw, and tighten the driver in a clockwise direction to combine the body and the abutment for easy separation Use the tool after connecting the ratchet wrench to the driver, if it is har... далее
CAS-KIT
CAS-KIT
ㆍPacking Unit : each part ㆍForms holes in the bone to facilitate initial drilling ㆍBone density can be determined through drilling ㆍTiN coating improves anti-corrosion and we... далее
LAS-KIT
LAS-KIT
Dome drill ø5.5/ø7.0 & Wide dome drill ø7.0, Core drill ø5.5/ø7.0, Side wall drill, Bone separator, Stopper 0.5 / 1.0 / 1.5 / 2.... далее
CAS drill
CAS drill
Fixture ø Fø4.0 Fø4.5 Fø5.0 Bone Density Soft Normal Soft Normal Soft Normal D ø2.8 ø3.1 ø3.3 ø3.6 ø3.8 ø4.1 Code SNDR2813T SNDR3113T SNDR3313T SNDR3613T SNDR3813T SNDR4113T ㆍPacking Unit: Tissue Punch + Guide Pin ㆍMake a conical bone lid for membrane safely lifting. ㆍFlexible Drilling speed ranges from low speed to high speed (800rpm) Especially, Bone harvesting in low speed(about 50rpm) ㆍDrill depth control by unique stopper systems. Code SNTD2013T ㆍPacking Unit: each part ㆍUnder drilling than 2mm of remaining bone in CT or panorama ㆍTip : 0.6mm ㆍDrill depth control by unique stopper systems. Remaining Length(mm) 2 3 4 5 6 7 8 9 10 11 12 Code SNST2 SNST3 SNST4 SNST5 SNST6 SNST7 SNST8 SNST9 SNST10 SNST11 SNST12 ㆍPacking Unit: Tissue Punch + Guide Pin ㆍA total of eleven (11) stoppers; labeled 2 to 12mm ㆍLabels indicate the remaining length of the drill (from drill tip to stopper top) ㆍEach stopper is anodized and color coded. Labels are laser etched. ㆍThis surgical procedure use only Maxillary sinus surgery. Don't use for Mandible surgery. ㆍFor more information, can visit www.hiossen.com Fixture Selection Twist Drill CAS-Drill F(Dø) SNST2 ø2.0 ø2.8 ø3.1 ø3.3 ø3.6 ø3.8 ø4.1 ø4.0 Soft ▶ ▶ ø4.5 ▶ ▶ ▶ ø5.0 ▶ ▶ ▶ ø4.0 Normal ▶ ▶ ø4.5 ▶ ▶ ▶ ø5.0 ▶ ▶ ... далее