Вы смотрите фотографию с сайта - чтобы вернуться на него перейдите по ссылке osstem.su

Screw Removal Tools

  Mini Regular/ Wide
Short - ORVDRS
Long ORVDML ORVDRL
  • ㆍPacking Unit : each part
  • ㆍTool for removing broken screws
  • ㆍThis tool should be used together with the guide for each system
  • ㆍWhen the marked part of the reverse drill is exposed above the guide connected to the fixture, make use of the screw-older to remove the broken Screws
  • ㆍHand type
  • ㆍMode: Counter clockwise
  • ㆍLifecycle: Ten uses
  • ㆍColor coding for easy discrimination of the specifications Mini: Yellow, Regular/ Wide :Green
    Mini Regular Wide
TS Non-Hex ORVDRS OGGSN -
Hex ORVDRL OGGS -
SS Non-Octe   OSGRN
Octe   OSGR
US Hex OUGM OUGR OUGW
  • ㆍPacking Unit : each part
  • ㆍGuide used to prevent the reverse driver, the removal bur and the re-tap from centering or vibrating
  • ㆍThe guide should be used after connecting to the abutment removal handle
  • ㆍColor coding for easy discrimination of the specifications Mini:Yellow, Regular : Green, Wide : Green
  Mini Regular Wide
Code OSHM OSHR OSHW
  • ㆍPacking Unit : each part
  • ㆍThis tool is used for removal of fractured screw; expose the fractured screw by 1-2 threads using a reverse driver, push it on the fractured screw for combination, and remove the fractured screw.
  • ㆍThe guide should be used after connecting to the abutment removal handle
  • ㆍColor coding for easy discrimination of the specifications Mini:Yellow, Regular : Green, Wide : Green
  Mini(M1.6) Regular(M2.0) Wide(M2.5)
Code ORTM ORTR ORTW
  • ㆍPacking Unit : each part
  • ㆍTool used for forming new threads if a screw is not connected because the threads inside the fixture have been damaged
  • ㆍColor coding for easy discrimination of the specifications Mini:Yellow, Regular : Green, Wide : Green
  Mini Regular
Code OARTM OARTR
  • ㆍPacking Unit : each part
  • ㆍThis tool is used when part of a broken abutment or mount gets caught in the fixture
  • ㆍRemove the fragment by shaking it with a forceps when connecting the fragment into the hole of the broken abutment, and then turn the connected part counter clock wise and fix the part
  • ㆍThis tool is also used for removing a screw if it is not possible to remove the screw because the hex of the screw has slipped in the case of the Minit 
    - It is possible to remove the screw by turning the screw counterclockwise and fixing the screw after connecting it to the slipped hex
  • ㆍMini: Makes it possible to remove a screw whose hex has slipped
Code OARH
  • ㆍPacking Unit : each part
  • ㆍThis tool should be used in conjunction with the guide
Code OTSD07
  • ㆍPacking Unit : each part
  • ㆍTool to be used after forming a slot with a bur of ø0.8 if it is not possible to exert force with the driver because of damage to the hex of the healing abutment, the cover screw and the abutment screw
Code MSTH
  • ㆍPacking Unit : each part
  • ㆍThis tool is used for initial manual installation after connecting it to the connection section of the torque driver
Code ORB
  • ㆍPacking Unit : each part
  • ㆍTool for removing broken screws
  • ㆍThis tool is used for forming a hole on the broken surface of the screw if it is not possible to remove the screw with a reverse driver
  • ㆍRotation direction: Clockwise
  • ㆍRecommended rotation speed: 1500 ~5000 rpm
  • ㆍThis tool should be used in conjunction with the guide
  • ㆍIt is necessary to minimize the generation of heat by pumping and water injection, and to remove any chips left behind after removing the screw with a suction tool
Code OSR
  • ㆍPacking Unit : each part
  • ㆍRotate the screw remover in the reverse direction in the hole of the broken surface of the screw formed by the removal bur to remove a broken screw
Code OSR
  • ㆍPacking Unit : each part
  • ㆍThis tool is used for removing the transfer abutment of non-hex-type caught in the fixture as a result of contact with a Morse Taper
  • ㆍThe terminal of the body is the Mini. The standard tool is inserted into the grooves in two stages in common usew
  • ㆍRotate the screw remover in the reverse direction in the hole of the broken surface of the screw formed by the removal bur to remove a broken screw
  • ㆍInsert the separate tool body into the hole inside the abutment after removing the abutment screw, and tighten the driver in a clockwise direction to combine the body and the abutment for easy separation Use the tool after connecting the ratchet wrench to the driver, if it is hard to separate


Screw Removal Tools

©